RMI-25

Complete Cooling System Care and Protection

About RMI-25

RMI-25 is a low cost cooling system additive that safeguards against engine failure. To learn about RMI-25, click here.

Technical Specs

Everything you need to know about RMI-25, coolants and cooling systems, and more. For technical info, click here.

Distributorship

Distributorships are available. For more information, call 1-800-783-0724 or to submit an interest form, click here.

Cleans

Breaks down rust, scale and corrosive deposits in radiator, engine block, heater core and hoses.

Inhibits

Inhibits rust build-up of mineral deposits, cavitation erosion, electrolysis and pitting.

Lubricates

Lubricates key engine cooling components like thermostats, water pump seals and heat controls.

Conditions

A surfactant agent improves heat transfer and makes water more efficient than coolant itself.

RMI-25 IS NON-TOXIC AND BIODEGRADABLE

RMI-25 restores engine performance by removing rust, scale and corrosive deposits, changing them from solids to harmless floating gel-like material that is flushed out into the coolant recovery tank, leaving you within a few weeks of driving, with a clean performing engine. The product forms an organic barrier on the now clean metal, preventing further contamination. The product’s oxygen scavenger provents cavitation, erosion and cylinder pitting and it acts as a lubricant for seals, hoses and water pumps. Water Conditioning is accomplished by a surfactant agent, improving heat transfer, making water more efficient than coolant itself.

RMI-25 Protects Your Engine

Cleans and rejuvenates your cooling system
Protects and improves engine performance
Recommended for use in gas and diesel vehicles
Enhances race car performance
Improved heat dissipation in hot-running heavy duty trucks and industrial equipment
Great for old and new vehicles

Power Flush your Cooling System while you Drive

BECOME A DISTRIBUTOR

Testimonials

1965 GTO

“We have been very impressed with the results of RMI-25. We were recently involved in a tear-down of a Cummins NTC350 that was running the RMI-25 and we were amazed at the condition of the liners and radiator. They were extremely clean and showed no signs of pitting. It is very difficult to remember replacing a water pump since switching to RMI-25. We are very happy with this quality product.”

Purchasing ManagerWood Products Company

“I had a concrete pump truck overheat but I had no time to rod it out. So I added RMI-25 & the temperature had dropped from 220 degrees to 200 in one day of use, so needless to say “I WAS IMPRESSED!” I started adding it to my fleet & now I haven’t had to change a water pump in approximately 1 year & radiator repairs have declined also.”

Shop ManagerConcrete Contractor

“Since using RMI-25 we have experienced no cooling system problems what so ever. Water pump replacement is almost non-existent, not to mention No more radiator Rod Outs.”

Transportation Maintenance ForemanSchool Bus Fleet